Structural & Specialist Blind Rivets

Showing 1–16 of 19 results

  • fasteners

    Avdel Avdelmate

    Fast Facts:

    • Non-structural breakstem rivet.
    • Rivet stem retained in tubular component to avoid loose stems.
    • Blind hole, one-sided installation capability.
    • Extra-wide grip range from 15.8 mm to 98.4 mm (5/8″ to 3-7/8″).
    • Large bearing area against both sides of the application.
    • Spreads the tail bearing load/clamp load on the rear sheet to prevent damage.
    • Clamps tightly and securely without crushing parent material.
    • Excellent hole fill via radially expanded rivet body for a strong and vibration-resistant joint.
    • Low profile headform on both sides of the application for a neat appearance.
    • Can be used to fasten metal to metal, plastic to plastic, metal to plastic, metal rear sheet, and various composite materials.
    • Breakstem fasteners can be customized to meet unique assembly requirements.

    Specifications:

    • Sizes: 4.8 mm and 6.4 mm (3/16″ and 1/4″)
    • Materials: Aluminum alloy and steel
    • Headforms: Dome
    AVDELMATE® – SERIES
    Material Headform Series
    Steel Dome Avdelmate® SSLMS
    Aluminium Alloy Dome Avdelmate® BALMS
    Body: Aluminium
    Mandrel: Steel
    Tube: Aluminium
    Dome Avdelmate® BSLMS

     

    Details can be found in the Breakstem Systems Catalog available in our Document Library.

  • fasteners

    Avdel Avex

    Fast Facts:

    • Non-structural breakstem rivet.
    • Retained stem.
    • Blind hole, one-sided installation capability.
    • Multi-grip capability.
    • Good hole fill.
    • Provides a large blind side bearing area against the rear sheet.
    • Wide choice of installation tools.
    • One fastener can be used to replace several standard grip fasteners.
    • Accommodates wide variations in material thickness.
    • Reduced fastener inventory and simpler stock control.
    • Spreads the tail bearing load/clamp on the rear sheet.
    • Ideal for use in thin sheet materials.
    • Compensates for irregular, oversized, slotted, or misaligned holes.
    • Can stop sheet movement in non-standard holes.
    • Provides strong, vibration-resistant joints.
    • No damage, electrical problems, or rattling due to loose stems.
    • Breakstem fasteners can be customized to meet unique assembly requirements.

    Specifications:

    • Sizes: 3.0mm to 6.4mm (1/4″)
    • Materials: Aluminum alloy with steel or stainless steel stems
    • Headforms: Dome, countersunk, and large flange
  • fasteners

    Avdel Avibulb

    Fast Facts:

    • Non-structural breakstem rivet.
    • Retained stem.
    • Blind hole, one-sided installation capability.
    • High shear and tensile strength.
    • Good hole fill.
    • Provides a large blind side bearing area against the rear sheet.
    • Ideal for applications requiring elevated temperatures.
    • Spreads the tail bearing load/clamp on the rear sheet.
    • Ideal for use in thin sheet materials.
    • Compensates for irregular, oversized, slotted, or misaligned holes.
    • Can stop sheet movement in non-standard holes.
    • Provides strong, vibration resistant joints.
    • No damage, electrical problems, or rattling due to loose stems.
    • Breakstem fasteners can be customized to meet unique assembly requirements.

    Specifications:

    • Sizes: 3.2mm (1/8″) to 6.0mm
    • Material: Steel, zinc & clear passivated
    • Headform: Dome
  • fasteners

    Avdel Avibulb XT

    Fast Facts:

    • Structural breakstem rivet.
    • Reliable stem retention.
    • Blind hole, one-sided installation capability.
    • High shear and tensile strength.
    • Multi-grip capability.
    • High residual clamp load.
    • Resists vibration and joint slippage.
    • Good blind side footprint and bulb formation.
    • Spreads the tail bearing load/clamp on the rear sheet.
    • Suitable in softer materials.
    • Underhead recess accommodates burrs around holes and spreads load evenly on top sheet.
    • Avdel® patent protected.
    • Breakstem fasteners can be customized to meet unique assembly requirements.

    Specifications:

    • Size: 6.4mm (1/4”) diameter
    • Material: Steel, zinc & clear passivated
    • Headform: Dome
  • fasteners

    Avdel Avinox

    Fast Facts:

    • Non-structural breakstem rivet.
    • Retained stem.
    • Blind hole, one-sided installation capability.
    • High corrosion resistance.
    • High shear and tensile strength.
    • Good hole fill.
    • Provides a large blind side bearing area against the rear sheet.
    • Ideal for applications requiring elevated temperatures.
    • Spreads the tail bearing load/clamp load on the rear sheet.
    • Ideal for use in thin sheet materials.
    • Compensates for irregular, oversized, slotted, or misaligned holes.
    • Can stop movement in non-standard holes.
    • Provides strong, vibration-resistant joints.
    • Breakstem fasteners can be customized to meet unique assembly requirements.

    Specifications:

    • Sizes: 3.2mm to 4.8mm (1/8″ to 3/16″)
    • Material: Stainless steel A2 and A4/316 Grade
    • Headform: Dome
    AVINOX® – SERIES
    Material Headform Series
    Stainless Steel A2 Dome Avinox® BE61
    Stainless Steel A4 Dome Avinox® BE16

     

    Details can be found in the Breakstem Systems Catalog available in our Document Library.

  • fasteners

    Avdel Bulbex

    Fast Facts:

    • Non-structural breakstem rivet.
    • Retained stem.
    • Blind hole, one-sided installation capability.
    • Multi-grip capability.
    • Split tail formation provides a very large blind side bearing area against the rear sheet.
    • Wide choice of installation tools.
    • One fastener can often be used to replace several standard grip fasteners.
    • Accommodates wide variations in material thickness.
    • Reduced fastener inventory and simpler stock control.
    • Spreads the tail bearing load/clamp load on the rear sheet.
    • No damage, electrical problems, or rattling due to loose stems.
    • Breakstem fasteners can be customized to meet unique assembly requirements.

    Specifications:

    • Sizes: 4.0mm and 4.8mm (5/32″ and 3/16″)
    • Material: Aluminium alloy
    • Headform: Dome, large flange
  • fasteners

    Avdel Hemlok

    Fast Facts:

    • Structural breakstem rivet.
    • Retained stem.
    • Blind hole, one-sided installation capability.
    • Exceptional shear and tensile strength.
    • Large blind side bearing area against the rear sheet.
    • Interference lock formed by a splined stem.
    • Spreads the tail bearing/clamp load on the rear sheet.
    • Ideal for thin sheet materials.
    • Provides strong, vibration resistant joints.
    • No damage, electrical problems, or rattling due to loose stems.
    • Breakstem fasteners can be customized to meet unique assembly requirements.

    Specifications:

    • Sizes: 6.4mm (¼”)
    • Materials: Aluminium alloy, steel
    • Headform: Protruding
    HEMLOK® – SERIES
    Material Headform Series
    Steel Protruding Hemlok® 2221
    Aluminium Alloy Protruding Hemlok® 2241

     

    Details can be found in the Breakstem Systems Catalog available in our Document Library.

  • fasteners

    Avdel Hemlok

    Fast Facts:

    • Structural breakstem rivet.
    • Retained stem.
    • Blind hole, one-sided installation capability.
    • Exceptional shear and tensile strength.
    • Large blind side bearing area against the rear sheet.
    • Interference lock formed by a splined stem.
    • Spreads the tail bearing/clamp load on the rear sheet.
    • Ideal for thin sheet materials.
    • Provides strong, vibration resistant joints.
    • No damage, electrical problems, or rattling due to loose stems.
    • Breakstem fasteners can be customized to meet unique assembly requirements.

    Specifications:

    • Sizes: 6.4mm (¼”)
    • Materials: Aluminium alloy, steel
    • Headform: Protruding
    HEMLOK® – SERIES
    Material Headform Series
    Steel Protruding Hemlok® 2221
    Aluminium Alloy Protruding Hemlok® 2241

     

    Details can be found in the Breakstem Systems Catalog available in our Document Library.

  • fasteners

    Avdel Interlock

    Fast Facts:

    • Structural breakstem rivet.
    • Stem mechanically locked into body.
    • Blind hole, one-sided installation capability.
    • Multi-grip capability.
    • High shear and tensile strength.
    • Good sheet take-up performance.
    • Excellent hole fill via radially expanded body.
    • Wide choice of installation tools.
    • One fastener can be used to replace several standard grip fasteners.
    • Reduced fastener inventory and simpler stock control.
    • Compensates for irregular, oversized, slotted, or misaligned holes.
    • Can stop sheet movement in non-standard holes.
    • Large gap-closing capability.
    • Provides very strong, vibration-resistant joints.
    • No damage, electrical problems, or rattling due to loose stems.
    • Breakstem fasteners can be customized to meet unique assembly requirements.

    Specifications:

    • Sizes: 4.8mm, 6.4mm (3/16″, ¼”) and 10 mm (3/8″) steel version
    • Materials: Aluminum alloy, Steel, and Stainless Steel
    • Headforms: Protruding and countersunk
    INTERLOCK® – SERIES
    Material Headform Series
    Steel Protruding
    100° Countersunk
    Interlock® SSPI
    Interlock® SSCI
    Stainless Steel Protruding Interlock® CCPI
    Aluminium Alloy Protruding Interlock® BAPI

     

    Details can be found in the  Breakstem Systems Catalog available in our Document Library

  • monobolt

    Avdel Klamp-Tite

    Fast Facts:

    • Structural breakstem rivet.
    • Stem is mechanically locked into body.
    • Provides very strong, vibration-resistant joints.
    • Blind hole, one-sided installation capability.
    • Split tail formation spreads the tail bearing load/clamp load on the rear sheet.
    • Ideal for use in thin sheet materials offering high resistance to pull-out loads.
    • Multi-grip capability accommodates wide variations in material thickness.
    • Ideal for use in very soft or brittle materials.
    • Visible lock for quick and easy inspection.
    • Optional underhead washer provides a weatherproof seal.
    • Breakstem fasteners can be customized to meet unique assembly requirements.

    Specifications:

    • Sizes: 4.8 mm and 6.4 mm (3/16″ and 1/4″)
    • Material: Aluminum alloy
    • Headform: Protruding
    STRUCTURAL KLAMP-TITE® – SERIES
    Material Headform Series
    Aluminum Alloy Protruding head Structural BAPKTR

     

    Details can be found in the Breakstem Systems Catalog available in our Document Library.

     

  • monobolt

    Avdel Monobolt

    Fast Facts:

    • Structural breakstem rivet.
    • Stem mechanically locked into body.
    • Blind hole, one-sided installation capability.
    • Multi-grip capability.
    • High shear and tensile strength.
    • Good sheet take-up performance.
    • Visible lock for quick and easy inspection.
    • Excellent hole fill via rapidly expanded body.
    • Wide choice of installation tools.
    • One fastener can be used to replace several standard grip fasteners.
    • Reduced fastener inventory and simpler stock control.
    • Compensates for irregular, oversized, slotted, or misaligned holes.
    • Can stop sheet movement in non-standard holes.
    • Large gap closing capability.
    • Provides very strong, vibration-resistant joints.
    • No damage, electrical problems, or rattling due to loose stems.
    • Breakstem fasteners can be customized to meet unique assembly requirements.

    Specifications:

    • Sizes: 4.8mm, 6.4mm and 10 mm (3/16″, ¼” and 3/8″)
    • Materials: Aluminum alloy, steel, and stainless steel 304Cu grade / A2 and 316 grade / A4
    • Headforms: Protruding and countersunk
    MONOBOLT®– SERIES
    Material Headform Series
    Steel Protruding
    100° Countersunk
    Monobolt® 2771
    Monobolt® 2761
    Stainless Steel 304Cu / A2

    Stainless Steel 316 / A4*

    Protruding
    100° Countersunk
    Protruding
    Monobolt® 2711
    Monobolt® 2721
    Monobolt® 2717*
    Aluminum Alloy Protruding
    100° Countersunk
    Monobolt® 2774
    Monobolt® 2764

     

    Details can be found in the Breakstem Systems Catalog available in our Document Library.

    *Why 316 Grade / A4 Stainless Steel?
    The Monobolt® range has now been extended through the addition of a 316 Grade / A4 stainless steel Monobolt® suitable for applications in marine and hostile environments where 304Cu Grade / A2 stainless steel Monobolt® may not be the most suitable solution.

    316 Grade has a higher nickel content than other alloys and contains molybdenum. The molybdenum allows the material to deliver enhanced corrosion resistance particularly to pitting and crevice corrosion. Additionally this alloy lends itself to both forming and welding without excessive cracking. For this reason, it is particularly good for assemblies in marine and hostile environments.

     

  • monobolt

    Avdel Q Rivet

    Fast Facts:

    • Structural breakstem rivet.
    • Retained stem.
    • Blind hole, one-sided installation capability.
    • Weatherproof fastener.
    • Interference lock formed by a splined stem.
    • Provides powerful locking strength and hole filling.
    • High shear and tensile strength.
    • Spreads the tail bearing/clamp load on the rear sheet.
    • Ideal for thin sheet materials.
    • Provides strong, vibration-resistant joints.
    • No damage, electrical problems, or rattling due to loose stems.
    • Breakstem fasteners can be customized to meet unique assembly requirements.

    Specifications:

    • Sizes: 3.2 mm to 6.4 mm (1/8″ to ¼”)
    • Materials: Aluminum alloy, steel, and stainless steel
    • Headform: Protruding, large flange, and countersunk
    Q RIVET – SERIES
    Material Headform Series
    Steel Protruding Q Rivet SSPQ
    120° Countersunk Q Rivet SSCQ
    Large Flange Q Rivet SSLQ
    Aluminium Protruding Q Rivet AAPQ
    Large flange Q Rivet AALQ
    Countersunk Q Rivet AACQ
    Aluminium Body
    Steel Stem
    Protruding Q Rivet BSPQ
    Large Flange Q Rivet BSLQ
    120° Countersunk Q Rivet BSCQ
    Stainless Steel Protruding Q Rivet CCPQ
    120° Countersunk Q Rivet CCCQ

     

    Details can be found in the Breakstem Systems Catalog available in our Document Library.

  • fasteners

    Avdel Stavex

    Fast Facts:

    • Non-structural breakstem rivet.
    • Retained stem.
    • Blind hole, one-sided installation capability.
    • Wide choice of installation tools.
    • Multi-grip capability.
    • Superior hole fill.
    • High shear and tensile strength.
    • Provides a large blind-side bearing area against the rear sheet.
    • One fastener can be used to replace several standard grip fasteners.
    • Accommodates wide variations in material thickness.
    • Reduced fastener inventory and simpler stock control.
    • Spreads the tail bearing load/clamp on the rear sheet.
    • Ideal for use in thin sheet materials.
    • Compensates for irregular, oversized, slotted or misaligned holes.
    • Can stop sheet movement in non-standard holes.
    • Provides strong, vibration-resistant joints.
    • No damage, electrical problems or rattling due to loose stems.
    • Breakstem fasteners can be customized to meet unique assembly requirements.

    Specifications:

    • Sizes: 3.2mm to 6.4mm (1/8″ to ¼”)
    • Materials: Steel or stainless steel
    • Headforms: Dome, countersunk, and large flange
  • fasteners

    POP Grip Tite Rivets

    Through thick and thin, Grip Tite™ rivets feature strong, vibration-resistant joints. Even with thin sheet metal or plastics, Grip Tite™ rivets will set without any material deformation. Grip Tite™ rivets provide mandrel retention and an impressive expanded footprint on the blind side. The wide blind side expansion feature can compensate for irregular holes and spread…

  • Hydraulic Pumps

    POP High-Retention (HR) Rivets

    Fast Facts:

    • Blind hole, one-sided installation capability.
    • Rib design counters deformation and stress-fracture pressures.
    • Positively retained mandrel head.
    • Excellent rattle (noise) resistance.
    • Consistent and stable clamp force.
    • Increased secondary-side expansion.
    • Assembly applications include automotive, electronic assembly, and transportation.
  • Hydraulic Pumps

    POP High-Strength (HS) Rivets

    Fast Facts:

    • Increased blind-side expansion.
    • High clamp load.
    • Vibration-resistant joints.
    • Accommodates oversized holes.
    • Positively retained mandrel head.
    • Excellent rattle (noise) resistance.
    • Grooved mandrel.
    • Optimizes jaw and tool life.
    • For use in structural applications.