Rivets

Showing 1–16 of 40 results

  • fasteners

    Avdel Avdelmate

    Fast Facts:

    • Non-structural breakstem rivet.
    • Rivet stem retained in tubular component to avoid loose stems.
    • Blind hole, one-sided installation capability.
    • Extra-wide grip range from 15.8 mm to 98.4 mm (5/8″ to 3-7/8″).
    • Large bearing area against both sides of the application.
    • Spreads the tail bearing load/clamp load on the rear sheet to prevent damage.
    • Clamps tightly and securely without crushing parent material.
    • Excellent hole fill via radially expanded rivet body for a strong and vibration-resistant joint.
    • Low profile headform on both sides of the application for a neat appearance.
    • Can be used to fasten metal to metal, plastic to plastic, metal to plastic, metal rear sheet, and various composite materials.
    • Breakstem fasteners can be customized to meet unique assembly requirements.

    Specifications:

    • Sizes: 4.8 mm and 6.4 mm (3/16″ and 1/4″)
    • Materials: Aluminum alloy and steel
    • Headforms: Dome
    AVDELMATE® – SERIES
    Material Headform Series
    Steel Dome Avdelmate® SSLMS
    Aluminium Alloy Dome Avdelmate® BALMS
    Body: Aluminium
    Mandrel: Steel
    Tube: Aluminium
    Dome Avdelmate® BSLMS

     

    Details can be found in the Breakstem Systems Catalog available in our Document Library.

  • fasteners

    Avdel Avex

    Fast Facts:

    • Non-structural breakstem rivet.
    • Retained stem.
    • Blind hole, one-sided installation capability.
    • Multi-grip capability.
    • Good hole fill.
    • Provides a large blind side bearing area against the rear sheet.
    • Wide choice of installation tools.
    • One fastener can be used to replace several standard grip fasteners.
    • Accommodates wide variations in material thickness.
    • Reduced fastener inventory and simpler stock control.
    • Spreads the tail bearing load/clamp on the rear sheet.
    • Ideal for use in thin sheet materials.
    • Compensates for irregular, oversized, slotted, or misaligned holes.
    • Can stop sheet movement in non-standard holes.
    • Provides strong, vibration-resistant joints.
    • No damage, electrical problems, or rattling due to loose stems.
    • Breakstem fasteners can be customized to meet unique assembly requirements.

    Specifications:

    • Sizes: 3.0mm to 6.4mm (1/4″)
    • Materials: Aluminum alloy with steel or stainless steel stems
    • Headforms: Dome, countersunk, and large flange
  • fasteners

    Avdel Avibulb

    Fast Facts:

    • Non-structural breakstem rivet.
    • Retained stem.
    • Blind hole, one-sided installation capability.
    • High shear and tensile strength.
    • Good hole fill.
    • Provides a large blind side bearing area against the rear sheet.
    • Ideal for applications requiring elevated temperatures.
    • Spreads the tail bearing load/clamp on the rear sheet.
    • Ideal for use in thin sheet materials.
    • Compensates for irregular, oversized, slotted, or misaligned holes.
    • Can stop sheet movement in non-standard holes.
    • Provides strong, vibration resistant joints.
    • No damage, electrical problems, or rattling due to loose stems.
    • Breakstem fasteners can be customized to meet unique assembly requirements.

    Specifications:

    • Sizes: 3.2mm (1/8″) to 6.0mm
    • Material: Steel, zinc & clear passivated
    • Headform: Dome
  • fasteners

    Avdel Avibulb XT

    Fast Facts:

    • Structural breakstem rivet.
    • Reliable stem retention.
    • Blind hole, one-sided installation capability.
    • High shear and tensile strength.
    • Multi-grip capability.
    • High residual clamp load.
    • Resists vibration and joint slippage.
    • Good blind side footprint and bulb formation.
    • Spreads the tail bearing load/clamp on the rear sheet.
    • Suitable in softer materials.
    • Underhead recess accommodates burrs around holes and spreads load evenly on top sheet.
    • Avdel® patent protected.
    • Breakstem fasteners can be customized to meet unique assembly requirements.

    Specifications:

    • Size: 6.4mm (1/4”) diameter
    • Material: Steel, zinc & clear passivated
    • Headform: Dome
  • fasteners

    Avdel Avinox

    Fast Facts:

    • Non-structural breakstem rivet.
    • Retained stem.
    • Blind hole, one-sided installation capability.
    • High corrosion resistance.
    • High shear and tensile strength.
    • Good hole fill.
    • Provides a large blind side bearing area against the rear sheet.
    • Ideal for applications requiring elevated temperatures.
    • Spreads the tail bearing load/clamp load on the rear sheet.
    • Ideal for use in thin sheet materials.
    • Compensates for irregular, oversized, slotted, or misaligned holes.
    • Can stop movement in non-standard holes.
    • Provides strong, vibration-resistant joints.
    • Breakstem fasteners can be customized to meet unique assembly requirements.

    Specifications:

    • Sizes: 3.2mm to 4.8mm (1/8″ to 3/16″)
    • Material: Stainless steel A2 and A4/316 Grade
    • Headform: Dome
    AVINOX® – SERIES
    Material Headform Series
    Stainless Steel A2 Dome Avinox® BE61
    Stainless Steel A4 Dome Avinox® BE16

     

    Details can be found in the Breakstem Systems Catalog available in our Document Library.

  • Hydraulic Pumps

    Avdel Avlug

    Fast Facts:

    • Rolled/knurled shank ensures secure placement in the PCB.
    • Suitable for wire wrapping or a test point for CRO tubes.
    • Assembly applications include terminal posts and wire wrap.

    Specifications:

    • Sizes: 1.6mm, 2.4mm and 3.2mm (1/16”, 3/32″ and 1/8”)
    • Materials: Electro tin-plated* brass (WEEE & RoHS compliant)
    • Headforms: Dome
    AVLUG® – SERIES
    Material Headform Series
    Electro tin-plated* brass Dome Avlug® 1107

    * Avdel® recommends tin-plated Avlug® parts are installed within nine months from the date they were produced.

    Surface finish options
    If you are looking for other surface finish options than shown in the above datasheets please download our.

  • Hydraulic Pumps

    Avdel Avsert

    Fast Facts:

    • Blind hole, one-sided installation capability.
    • Internally threaded bore takes a threaded part e.g. D-subminiature connectors.
    • Available in many stand-off heights to accommodate a wide variety of components.
    • Can be used for board thicknesses of 0.8-2.0 mm (short spigot) or 0.8-2.4 mm max (long spigot).
    • Suitable as a female mating bush for D-subminiature connectors.
    • Available as a customized design to meet your unique assembly requirements.
    • Popular assembly applications include aluminum geartrays and extrusions, d-connectors, PCBs, and telecommunications equipment.

    Specifications:

    • Sizes: M2.5 X 0.45 and M3 X 0.5 threads
    • Material: Tin-plated* brass
    AVSERT® – SERIES
    Material Version Series
    Tin-plated* brass short spigot Avsert® 1117
    Tin-plated* brass long spigot Avsert® 1118

    * Avdel® recommends tin-plated Avsert® parts are installed within 24 months from the date they were produced.

  • Hydraulic Pumps

    Avdel Avtronic

    Fast Facts:

    • Blind hole, one-sided installation capability.
    • Annular grooves on the body expand radially during installation.
    • Provides a vibration-resistant joint, increased pull-out resistance, and good residual clamp.
    • Available options accommodate most combinations of connector and PC board thickness.
    • Available as a customized design to meet your unique assembly requirements.

    Specifications:

    • Sizes: 2.5mm and 2.8mm
    • Materials: Electro tin plated* brass and aluminum alloy (WEEE & RoHS compliant)
    • Headforms: Dome
    AVTRONIC® – SERIES
    Material Headform Series
    Aluminum alloy Dome Avtronic® 1189
    Electro tin-plated* brass Dome Avtronic® 1188

    * Avdel® recommends tin-plated Avtronic® fasteners are installed within nine months from the date they were produced.

  • Hydraulic Pumps

    Avdel Briv

    Fast Facts:

    • Bulbed tail and foreshortening of the fastener during installation ensures high clamp.
    • Bulbed tail and large headform provide a large bearing area for soft materials.
    • Tapered tail for ease of hole entry.
    • Expands radially during installation to ensure maximum hole fill.
    • Lower in-place costs than welding or nail rivets.
    • Placed using a unique repetition mandrel system for high-speed assembly.
    • Can be bowl fed for larger volume applications using automated equipment.
    • Available as a customized design to meet your unique assembly requirements.
    • Popular assembly applications include automotive, electronic components, sheet metal, electrical engineering, domestic appliances, furniture, and general light fabrication.

    Specifications:

    • Sizes: 2.4mm (3/32″) to 6.0mm
    • Materials: Aluminum alloy, steel, stainless steel, brass, and tin-plated brass*
    • Headforms: Dome/mushroom, countersunk
  • fasteners

    Avdel Bulbex

    Fast Facts:

    • Non-structural breakstem rivet.
    • Retained stem.
    • Blind hole, one-sided installation capability.
    • Multi-grip capability.
    • Split tail formation provides a very large blind side bearing area against the rear sheet.
    • Wide choice of installation tools.
    • One fastener can often be used to replace several standard grip fasteners.
    • Accommodates wide variations in material thickness.
    • Reduced fastener inventory and simpler stock control.
    • Spreads the tail bearing load/clamp load on the rear sheet.
    • No damage, electrical problems, or rattling due to loose stems.
    • Breakstem fasteners can be customized to meet unique assembly requirements.

    Specifications:

    • Sizes: 4.0mm and 4.8mm (5/32″ and 3/16″)
    • Material: Aluminium alloy
    • Headform: Dome, large flange
  • Hydraulic Pumps

    Avdel Chobert

    Fast Facts:

    • Internally tapered bore ensures consistent light clamp to reduce potential damage to soft or brittle materials.
    • The light clamp makes it ideal for use as a pivot pin or hose tail.
    • Expands radially during installation to ensure maximum hole fill.
    • Lower in-place costs than welding or nail rivets.
    • Placed using a unique repetition mandrel system for high-speed assembly.
    • Can be bowl fed for larger volume applications using automated equipment.
    • Available as a customized design to meet your unique assembly requirements.
    • Popular assembly applications include automotive, electronic component, sheet metal, electrical engineering, injection molded components, switchgear, domestic appliance, and light fabrication.

    Specifications:

    • Sizes: 2.4mm to 6.4mm (3/32″ to ¼”)
    • Materials: Aluminum alloy, steel, brass, nickel-plated brass, and tin-plated brass*
    • Headform: Dome/mushroom and countersunk
    CHOBERT® – SERIES
    Material Headform Series
    Aluminum Alloy Dome
    120° Countersunk
    Low profile
    Chobert® 1125/31/35/64
    Chobert® 1124/32/36
    Chobert® 1162
    Steel Dome
    120° Countersunk
    Chobert® 1121
    Chobert® 1122
    Brass

    – electro tin plated*

    – nickel plated

    Dome
    Countersunk
    Dome
    Countersunk
    Dome
    Countersunk
    Chobert® 1141
    Chobert® 1142
    Chobert® 1143
    Chobert® 1144
    Chobert® 1147
    Chobert® 1148

    * Avdel® recommends tin-plated Chobert® fasteners are installed within nine months from the date they were produced.

  • Hydraulic Pumps

    Avdel Double Flush Chobert

    Fast Facts:

    • Flush surface on both sides of the component.
    • Reduces excess space requirements within the chassis.
    • Common hole form can be used throughout the chassis design to reduce complexity.
    • Can be installed from either direction if accessible.
    • Expands radially in the material during installation.
    • Provides superior joint strength when compared to competitive technologies.
    • One-piece fastener eliminates potential stem fall out that can cause electrical problems.
    • Rapid installation with magazine or bowl feed fasteners.
    • Available as a customized design to meet your unique assembly requirements.
    • Popular electronics industry assembly applications include computer chassis, casings, small electronic devices, and applications with exceptionally thin sheet.
    • Size: 3.2 mm (1/8″) diameter
    • Material: Steel with Zinc clear passivation
    • Head Form: Countersunk
  • Bolting Tools

    Avdel Euro Hexsert / Hexsert

    Fast Facts:

    • Improves torque-to-turn by up to 200% in sheet metal compared to round-body inserts.
    • Blind hole, one-sided installation capability.
    • Superior pull-out performance.
    • Can be used for very thin sheet materials from 0.50mm (0.02″).
    • Double diameter body and lead-in chamfer provide easy insertion into hole.
    • Provide a female thread in application.
    • Can be installed in pre-coated or post-painted applications without damaging the surface.
    • Clamp two or more sheets.
    • Various platings available to increase corrosion resistance.
    • Low-profile version allows near-flush fit to application.
    • Large-flange version provides greater load-bearing surface. Reinforces hole to prevent push out.
    • Large-flange version can be used as a spacer and can be supplied with an underhead seal.
    • Closed end prevents the ingress of dirt and fluids into thread and electrical circuits.
    • Assembly applications include automotive chassis components, electrical engineering, sheet metal, domestic appliances, switchgear cabinets, and thermal applications.

     

    Specifications:

    • Thread Sizes: M3-M12
    • Material: Steel, stainless steel
    • Finishes: Steel: Zinc plated and clear trivalent passivated
    • Headforms: Low profile and large flange
    • Option: Closed end
    • Hole Size: Metric and imperial options
  • Bolting Tools

    Avdel Eurosert

    Fast Facts:

    • Can be used in very thin sheet materials from 0.25mm (0.01″).
    • Blind hole, one-sided installation capability.
    • Double diameter body and lead-in chamfer provide easy insertion into hole.
    • Provide a female thread-in application.
    • Clamps two or more sheets of material together, within the grip range.
    • Low-profile version allows near-flush fit to application.
    • Large-flange version provides greater load-bearing surface. Reinforces hole to prevent push out.
    • Large-flange version can be used as a spacer and can be supplied with an underhead seal.
    • For hard metric hole sizes.
    • Assembly applications include automotive, electrical engineering, electronic components, sheet metal, domestic appliances, and general light fabrication.

     

    Specifications:

    • Thread Sizes: M3-M10
    • Material: Steel, stainless steel
    • Headforms: Low profile and large flange
    • Body: With or without splines
    • Hole Size: Metric
  • Hydraulic Pumps

    Avdel Grovit

    Fast Facts:

    • Provides a vibration-resistant joint with increased pull-out resistance.
    • Suitable for blind hole applications.
    • Placed using a unique repetition mandrel system for high-speed assembly.
    • Available as a customized design to meet your unique assembly requirements.
    • Can be used to fasten: metal to metal, metal to plastic, plastic to plastic, aluminum alloy, wood, and fiberglass.
    • Assembly applications include automotive, electrical equipment, domestic appliance, and injection-molded components.

    Specifications:

    • Sizes: 2.4mm to 4.8mm (3/32″ to 3/16″)
    • Materials: Aluminum alloy and steel
    • Headforms: Dome/mushroom or countersunk
  • fasteners

    Avdel Hemlok

    Fast Facts:

    • Structural breakstem rivet.
    • Retained stem.
    • Blind hole, one-sided installation capability.
    • Exceptional shear and tensile strength.
    • Large blind side bearing area against the rear sheet.
    • Interference lock formed by a splined stem.
    • Spreads the tail bearing/clamp load on the rear sheet.
    • Ideal for thin sheet materials.
    • Provides strong, vibration resistant joints.
    • No damage, electrical problems, or rattling due to loose stems.
    • Breakstem fasteners can be customized to meet unique assembly requirements.

    Specifications:

    • Sizes: 6.4mm (¼”)
    • Materials: Aluminium alloy, steel
    • Headform: Protruding
    HEMLOK® – SERIES
    Material Headform Series
    Steel Protruding Hemlok® 2221
    Aluminium Alloy Protruding Hemlok® 2241

     

    Details can be found in the Breakstem Systems Catalog available in our Document Library.