Rivets

Showing 13–24 of 40 results

  • Bolting Tools

    Avdel Euro Hexsert / Hexsert

    Fast Facts:

    • Improves torque-to-turn by up to 200% in sheet metal compared to round-body inserts.
    • Blind hole, one-sided installation capability.
    • Superior pull-out performance.
    • Can be used for very thin sheet materials from 0.50mm (0.02″).
    • Double diameter body and lead-in chamfer provide easy insertion into hole.
    • Provide a female thread in application.
    • Can be installed in pre-coated or post-painted applications without damaging the surface.
    • Clamp two or more sheets.
    • Various platings available to increase corrosion resistance.
    • Low-profile version allows near-flush fit to application.
    • Large-flange version provides greater load-bearing surface. Reinforces hole to prevent push out.
    • Large-flange version can be used as a spacer and can be supplied with an underhead seal.
    • Closed end prevents the ingress of dirt and fluids into thread and electrical circuits.
    • Assembly applications include automotive chassis components, electrical engineering, sheet metal, domestic appliances, switchgear cabinets, and thermal applications.

     

    Specifications:

    • Thread Sizes: M3-M12
    • Material: Steel, stainless steel
    • Finishes: Steel: Zinc plated and clear trivalent passivated
    • Headforms: Low profile and large flange
    • Option: Closed end
    • Hole Size: Metric and imperial options
  • Bolting Tools

    Avdel Eurosert

    Fast Facts:

    • Can be used in very thin sheet materials from 0.25mm (0.01″).
    • Blind hole, one-sided installation capability.
    • Double diameter body and lead-in chamfer provide easy insertion into hole.
    • Provide a female thread-in application.
    • Clamps two or more sheets of material together, within the grip range.
    • Low-profile version allows near-flush fit to application.
    • Large-flange version provides greater load-bearing surface. Reinforces hole to prevent push out.
    • Large-flange version can be used as a spacer and can be supplied with an underhead seal.
    • For hard metric hole sizes.
    • Assembly applications include automotive, electrical engineering, electronic components, sheet metal, domestic appliances, and general light fabrication.

     

    Specifications:

    • Thread Sizes: M3-M10
    • Material: Steel, stainless steel
    • Headforms: Low profile and large flange
    • Body: With or without splines
    • Hole Size: Metric
  • Hydraulic Pumps

    Avdel Grovit

    Fast Facts:

    • Provides a vibration-resistant joint with increased pull-out resistance.
    • Suitable for blind hole applications.
    • Placed using a unique repetition mandrel system for high-speed assembly.
    • Available as a customized design to meet your unique assembly requirements.
    • Can be used to fasten: metal to metal, metal to plastic, plastic to plastic, aluminum alloy, wood, and fiberglass.
    • Assembly applications include automotive, electrical equipment, domestic appliance, and injection-molded components.

    Specifications:

    • Sizes: 2.4mm to 4.8mm (3/32″ to 3/16″)
    • Materials: Aluminum alloy and steel
    • Headforms: Dome/mushroom or countersunk
  • fasteners

    Avdel Hemlok

    Fast Facts:

    • Structural breakstem rivet.
    • Retained stem.
    • Blind hole, one-sided installation capability.
    • Exceptional shear and tensile strength.
    • Large blind side bearing area against the rear sheet.
    • Interference lock formed by a splined stem.
    • Spreads the tail bearing/clamp load on the rear sheet.
    • Ideal for thin sheet materials.
    • Provides strong, vibration resistant joints.
    • No damage, electrical problems, or rattling due to loose stems.
    • Breakstem fasteners can be customized to meet unique assembly requirements.

    Specifications:

    • Sizes: 6.4mm (¼”)
    • Materials: Aluminium alloy, steel
    • Headform: Protruding
    HEMLOK® – SERIES
    Material Headform Series
    Steel Protruding Hemlok® 2221
    Aluminium Alloy Protruding Hemlok® 2241

     

    Details can be found in the Breakstem Systems Catalog available in our Document Library.

  • fasteners

    Avdel Hemlok

    Fast Facts:

    • Structural breakstem rivet.
    • Retained stem.
    • Blind hole, one-sided installation capability.
    • Exceptional shear and tensile strength.
    • Large blind side bearing area against the rear sheet.
    • Interference lock formed by a splined stem.
    • Spreads the tail bearing/clamp load on the rear sheet.
    • Ideal for thin sheet materials.
    • Provides strong, vibration resistant joints.
    • No damage, electrical problems, or rattling due to loose stems.
    • Breakstem fasteners can be customized to meet unique assembly requirements.

    Specifications:

    • Sizes: 6.4mm (¼”)
    • Materials: Aluminium alloy, steel
    • Headform: Protruding
    HEMLOK® – SERIES
    Material Headform Series
    Steel Protruding Hemlok® 2221
    Aluminium Alloy Protruding Hemlok® 2241

     

    Details can be found in the Breakstem Systems Catalog available in our Document Library.

  • Bolting Tools

    Avdel High Strength Hexsert

    Fast Facts:

    • Exceptional torque capability.
    • High-speed assembly.
    • Provides high-strength threads in thin materials starting at 0.5mm.
    • Increased thread strength.
    • Safeguard design avoids overtightening problems such as thread stripping.
    • Assembly applications include tubular steel, hydroformed parts, magnesium castings, and aluminum extrusions.

    Specifications:

    • Sizes: M6, M8, M10 and M12
    • Headforms: Large flange
    • Shape: Hexagon
    • Material: Steel Zinc plated to BS 3382 and clear passivated to achieve 240 hours resistance to red corrosion (ASTM B117) Hexavalent Chromium-free

    For assistance with hexagonal hole production, see our 74290 tool. The 74290 tool allows customers to benefit from the non-rotational properties of hexagonal inserts compared with round inserts. This is achieved by drilling a round hole, then inserting the 74290 tool and forming a hex hole.

  • fasteners

    Avdel Interlock

    Fast Facts:

    • Structural breakstem rivet.
    • Stem mechanically locked into body.
    • Blind hole, one-sided installation capability.
    • Multi-grip capability.
    • High shear and tensile strength.
    • Good sheet take-up performance.
    • Excellent hole fill via radially expanded body.
    • Wide choice of installation tools.
    • One fastener can be used to replace several standard grip fasteners.
    • Reduced fastener inventory and simpler stock control.
    • Compensates for irregular, oversized, slotted, or misaligned holes.
    • Can stop sheet movement in non-standard holes.
    • Large gap-closing capability.
    • Provides very strong, vibration-resistant joints.
    • No damage, electrical problems, or rattling due to loose stems.
    • Breakstem fasteners can be customized to meet unique assembly requirements.

    Specifications:

    • Sizes: 4.8mm, 6.4mm (3/16″, ¼”) and 10 mm (3/8″) steel version
    • Materials: Aluminum alloy, Steel, and Stainless Steel
    • Headforms: Protruding and countersunk
    INTERLOCK® – SERIES
    Material Headform Series
    Steel Protruding
    100° Countersunk
    Interlock® SSPI
    Interlock® SSCI
    Stainless Steel Protruding Interlock® CCPI
    Aluminium Alloy Protruding Interlock® BAPI

     

    Details can be found in the  Breakstem Systems Catalog available in our Document Library

  • monobolt

    Avdel Klamp-Tite

    Fast Facts:

    • Structural breakstem rivet.
    • Stem is mechanically locked into body.
    • Provides very strong, vibration-resistant joints.
    • Blind hole, one-sided installation capability.
    • Split tail formation spreads the tail bearing load/clamp load on the rear sheet.
    • Ideal for use in thin sheet materials offering high resistance to pull-out loads.
    • Multi-grip capability accommodates wide variations in material thickness.
    • Ideal for use in very soft or brittle materials.
    • Visible lock for quick and easy inspection.
    • Optional underhead washer provides a weatherproof seal.
    • Breakstem fasteners can be customized to meet unique assembly requirements.

    Specifications:

    • Sizes: 4.8 mm and 6.4 mm (3/16″ and 1/4″)
    • Material: Aluminum alloy
    • Headform: Protruding
    STRUCTURAL KLAMP-TITE® – SERIES
    Material Headform Series
    Aluminum Alloy Protruding head Structural BAPKTR

     

    Details can be found in the Breakstem Systems Catalog available in our Document Library.

     

  • monobolt

    Avdel Monobolt

    Fast Facts:

    • Structural breakstem rivet.
    • Stem mechanically locked into body.
    • Blind hole, one-sided installation capability.
    • Multi-grip capability.
    • High shear and tensile strength.
    • Good sheet take-up performance.
    • Visible lock for quick and easy inspection.
    • Excellent hole fill via rapidly expanded body.
    • Wide choice of installation tools.
    • One fastener can be used to replace several standard grip fasteners.
    • Reduced fastener inventory and simpler stock control.
    • Compensates for irregular, oversized, slotted, or misaligned holes.
    • Can stop sheet movement in non-standard holes.
    • Large gap closing capability.
    • Provides very strong, vibration-resistant joints.
    • No damage, electrical problems, or rattling due to loose stems.
    • Breakstem fasteners can be customized to meet unique assembly requirements.

    Specifications:

    • Sizes: 4.8mm, 6.4mm and 10 mm (3/16″, ¼” and 3/8″)
    • Materials: Aluminum alloy, steel, and stainless steel 304Cu grade / A2 and 316 grade / A4
    • Headforms: Protruding and countersunk
    MONOBOLT®– SERIES
    Material Headform Series
    Steel Protruding
    100° Countersunk
    Monobolt® 2771
    Monobolt® 2761
    Stainless Steel 304Cu / A2

    Stainless Steel 316 / A4*

    Protruding
    100° Countersunk
    Protruding
    Monobolt® 2711
    Monobolt® 2721
    Monobolt® 2717*
    Aluminum Alloy Protruding
    100° Countersunk
    Monobolt® 2774
    Monobolt® 2764

     

    Details can be found in the Breakstem Systems Catalog available in our Document Library.

    *Why 316 Grade / A4 Stainless Steel?
    The Monobolt® range has now been extended through the addition of a 316 Grade / A4 stainless steel Monobolt® suitable for applications in marine and hostile environments where 304Cu Grade / A2 stainless steel Monobolt® may not be the most suitable solution.

    316 Grade has a higher nickel content than other alloys and contains molybdenum. The molybdenum allows the material to deliver enhanced corrosion resistance particularly to pitting and crevice corrosion. Additionally this alloy lends itself to both forming and welding without excessive cracking. For this reason, it is particularly good for assemblies in marine and hostile environments.

     

  • Hydraulic Pumps

    Avdel NeoSpeed Speed Fastening System

    Fast Facts:

    • Multi-grip capability accommodates wide variations in material thickness.
    • One rivet can be used to replace several standard grip fasteners.
    • External splines fill rear sheet and oversize front sheet holes.
    • 3x greater hole-size tolerance than standard breakstem rivets.
    • Far less sensitive to application variations.
    • Easier specification due to one-rivet x one-mandrel solution.
    • Typically half the installed weight versus an equivalent breakstem rivet.
    • Either magazine-fed or fed via a vibrating bowl to a wide choice of installation equipment.
    • Assembly applications where you will find NeoSpeed® fasteners include automotive, electronic, domestic appliance, electrical equipment, and general light fabrication.

    Specifications:

    • Sizes: 3.2 mm (1/8″) to 4.8 mm (5/32″)
    • Materials: Steel, Stainless Steel A4, Aluminum
    • Head Styles: Mushroom, Countersunk
  • monobolt

    Avdel Q Rivet

    Fast Facts:

    • Structural breakstem rivet.
    • Retained stem.
    • Blind hole, one-sided installation capability.
    • Weatherproof fastener.
    • Interference lock formed by a splined stem.
    • Provides powerful locking strength and hole filling.
    • High shear and tensile strength.
    • Spreads the tail bearing/clamp load on the rear sheet.
    • Ideal for thin sheet materials.
    • Provides strong, vibration-resistant joints.
    • No damage, electrical problems, or rattling due to loose stems.
    • Breakstem fasteners can be customized to meet unique assembly requirements.

    Specifications:

    • Sizes: 3.2 mm to 6.4 mm (1/8″ to ¼”)
    • Materials: Aluminum alloy, steel, and stainless steel
    • Headform: Protruding, large flange, and countersunk
    Q RIVET – SERIES
    Material Headform Series
    Steel Protruding Q Rivet SSPQ
    120° Countersunk Q Rivet SSCQ
    Large Flange Q Rivet SSLQ
    Aluminium Protruding Q Rivet AAPQ
    Large flange Q Rivet AALQ
    Countersunk Q Rivet AACQ
    Aluminium Body
    Steel Stem
    Protruding Q Rivet BSPQ
    Large Flange Q Rivet BSLQ
    120° Countersunk Q Rivet BSCQ
    Stainless Steel Protruding Q Rivet CCPQ
    120° Countersunk Q Rivet CCCQ

     

    Details can be found in the Breakstem Systems Catalog available in our Document Library.

  • Bolting Tools

    Avdel Squaresert (Nutsert SQ)

    Fast Facts:

    • Improves torque-to-turn by up to 350% in sheet metal compared to round-body inserts.
    • Increases punch life compared to hexagonal geometries.
    • Blind hole, one-sided installation capability.
    • Superior pull-out performance.
    • Can be used for very thin sheet materials from 0.50mm (0.02″).
    • Provide a female thread-in application.
    • Can be installed in pre-coated or post-painted applications without damaging the surface.
    • Clamp two or more sheets.
    • Various platings available to increase corrosion resistance.
    • Large-flange head provides a load-bearing surface and reinforces the hole to prevent push-out.
    • Can be used as a spacer and can be supplied with an underhead seal.
    • Assembly applications where the Squaresert® is used include automotive body mountings, electrical enclosures, soft sheet metal, plastics & composites, domestic appliances, and general light fabrication.

    Specifications:

    • Thread Sizes: M5-M8
    • Material: Steel
    • Finishes: Zinc plated and clear trivalent passivated
    • Headform: Large flange
    • Hole Size: Metric