Hydraulic Tools And Systems

Some of the tools used for Hydraulic Tools And Systems are Bottle Jacks, Piston Cylinders Spring , Cylinders Spring and a portable pressure testing kit.

Showing 73–84 of 104 results

  • PS -Steel Hand Pumps 400 – 700 – 1000 Bar

    Features

    These hand pumps are robust and easy to use and require moderate handle effort. They are available in four models, with three pressure ratings, 400 – 700 – 1000 bar. These pumps can also operate in vertical position with their head downwards.

    All models are equipped with:

    – External adjustable safety valve ;
    – Fixing holes ;
    – Handle locking mechanism for an easy transport.

    Available with 0,42 – 0,8 lt. reservoirs depending on the model.

    OPERATIONAL AREAS

    These pumps are ideal to be used with small hydraulic tools and / or single acting cylinders that require a small amount of oil.

    STANDARD:

    All the PS model pumps have a hole on the head for the mounting of the G106L gauge.

    Read moreDone

  • Push Puller (Ck & Ba Series)

    Model Number Capacity (ton) Stroke A (mm) Reach (mm) Spread (mm) Tip Weight
    A B D E F (kg)
    CK-401 4 60 250 75 110 42 22 84 7.6
    CK-601 6 70 270 95 180 45 23 92 11
    CK-801 8 85 270 95 220 50 25 122 14.3
    CK-1201 12 85 381 120 290 60 28 118 23.8

     

    Model Number Spread (mm) Dimension Weight
    C A B D E (kg)
    BA-9005 5-6 70 125 17.5 3/8-24UNF 0.6
    BA-9010 15-60 100 135 21.5 1/2-20UNF 1.4
    BA-9015 12-70 130 163 27.5 5/8-18UNF 2.5
    BA-6 28-150 170 275 34 3/4-16UNF 5.5
    BA-9035 20-200 240 350 39 1-14UNF 8.5
    BA-9035A 20-200 200 360 36.5 7/8-14UNF 11
    Read moreDone

  • PV – Steel Hand Pumps With Large Oil

    Features

    These pumps are two-stage hand pumps with an automatic switch from the 1st to the 2nd stage. A moderate effort on the handle is required to reach the maximum working pressure.

    All models are equipped with :

    – Relief valve;
    – Carry handle;
    – 1/2” BSP connection for pressure gauge.

    Available in 10 or 20 litre reservoirs and 3-way, 4-way and 4-way with control check valves.

    OPERATIONAL AREAS

    These steel hand pumps are cheap and handy, and have a high flow and a big reservoir capacity if compared to electric or pneumatic power packs or to PN hand pumps.

    Read moreDone

  • PVL -Steel Hand Pumps With Large Oil Delivery And Lightweight Alloy Reservoir – 700 Bar

    Features

    These two-stage hand pumps are equipped with a valve. These pumps have bigger flow and capacitycompared to the PN hand pumps but they are also a very good alternative to the PV hand pumps if weight is a significant factor. This allows automatic switch from 1st to 2nd stage. Only a moderate effort on the handle is required to reach the maximum working pressure.

    All models are equipped with:

    – Relief valve ;
    – Carrying handle ;
    – Light alloy reservoir (it reduces considerably the weight of the pump) ;
    – 1/2’’ BSP connection for pressure gauge.

    Available with 3-way, 4-way, and 4-way with controlled check valves .

    OPERATIONAL AREAS

    These pumps have bigger flow and capacity compared to the PN hand pumps but they are also a very good alternative to the PV hand pumps if weight is a significant factor.

    ACCESSORIES :

    – ZPS12 Gauge adapter for G10 gauge with screw connection ;
    – ZPF121 Gauge adapter for G10 gauge with screw connection.

    Read moreDone

  • Quick Couplers K 700 Bar

    Features

    Quick release coupers are available in screw and flat face versions and are compatible with all the EUROPRESS product range and also interchangeable with most couplings used on high pressure hydraulic equipment.

    Flat face snap couplers are recommended because:

    – Anti-drip with negligible air or fluid inclusion during coupling and uncoupling operations ;
    – Easy to clean ;
    – Rotary motion which prevents hose twisting ;
    – Safe coupling system (two voluntary movemens are necessary for uncoupling).

    Read moreDone

  • Roll-Bed Press 80 to 200 ton

    Features: The original, patented Roll-Bed design. Bed rolls out for easy loading and unloading with a crane or other lifting device. Movable work head glides easily side to-side for full off-center load capacity across width of upper frame. “Daylight” is 1283 x 1524mm for 80- and 100-ton models; 1302 x 1625mm on 150- and 200-ton…

    Read moreDone

  • Sidewinder Jacks (Mini Jacks)

    Model Number Capacity Stroke Retracted Height min. Max. Height No. pump Stroke to Ext. Piston 25.4 mm Saddle Dia. Base Size Dia. Pump Handle Length Handle effort at rated cap. Carry Handle Product Weight
      Ton (mm) (mm) (mm) mm mm (mm) (mm) Kg   Kg
    AB-9105 5 19 63.5 85.7 30 29 73.8 240 26 No 1.9
    AB-9205 5 38 88.9 130.2 38 29 73.8 240 26 No 2.4
    AB-9210 10 30 120.7 149.2 36 42.1 109.9 440 28 No 5.5
    AB-9220 20 30 130.2 160.3 46 52.8 119.9 605 35 No 8
    Read moreDone

  • SPLITFLOW – Synchronous Lifting System – Power Packs Me##m53g

    Features

    The Split Flow hydraulic power packs have two or four independent outlets delivering a constant amount of oil even if the pressure in each line is not the same.
    They are equipped with:

    – 3-phase electric motor ;
    – Matched pump and tank ;
    – 2 or 4 (one for each port) 4-way, 3-position manual control valves with piloted check and 150 bar pressure setting on return B port ;
    – pressure gauges (one for each port).

    OPERATIONAL AREAS

    They are an efficient and economical solution particularly suitable to pressure up a maximum of 4 cylinders even with different loads. Given that they are based on equal geometrical pressure lines, without any external control on the stroke, Split Flow power packs provide for ±3% synchronous lifting with visual control of the operations.

    Read moreDone

  • Toe Bottle Jacks

    Model Capacity (Ton) Min. Height (mm) Max. Height (in) Weight
    Toe Head Toe Head Toe Head Kg
    ATJ-102 2 3 16 238 128.5 349 8
    ATJ-105 5 6 22 298.45 141.4 409.5 24
    ATJ-110 10 14 28.5 333.5 173 460.5 837.9

    FEATURES | ATJ-2 SERIES:

    1. Complies with ANSI/ASME B30.1, CE/GS standards.
    2. Compact and stable construction.
    3. Housing revolves 360o .
    4. Lowering speed can be accurately adjusted.
    5. Safety valve for overload protection.
    Model Capacity (Ton) Min. Height (mm) Max. Height (in) Weight
    Toe Head Toe Head Toe Head Kg
    ATJ-205 2 5 24.9 368 230.1 572 24.9
    ATJ-210 5 10 25 420.1 260 650 34.9
    ATJ-225 10 25 57.9 504.9 272 720 101.78
    Read moreDone

  • Trolley Mounted Posi Lock Phs Hydraulic Puller Set

    Model Number Capacity (ton) Number of Jaws Reach (mm) Spread (mm)
    PHMS-206 5 2 152.4 12.7 to 203.2
    PHMS-106 5 3 152.4 12.7 to 203.2
    PHMS-208 10 2 203 19 to 305
    PHMS-108 10 3 203 19 to 305
    PHMS-210 15 2 254 25 to 381
    PHMS-110 15 3 254 25 to 381
    PHMS-213 25 2 305 64 to 457
    PHMS-113 25 3 305 64 to 457
    PHMS-216 50 2 356 76 to 635
    PHMS-116 50 3 356 76 to 635

     

    Read moreDone

  • UB – Pipe Benders

    Features

    They are available in two versions:

    – UB# – with hand pump and former sets for use on Nominal Bore Tubes from 3/8’’ to 4’’
    – UB4M – with motor-driven pump complete with former set from 3/8’’ to 4’’

    If necessary this particularly silent and fast version can also be manually operated.

    OPERATIONAL AREAS

    UB pipe benders are suitable for cold-bending without filling the tubes from 3/8” to 4” sized nominal bore to obtain discontinous right and left bends up to 90°. They are suitable only for commercial gas hoses up to their nominal diameter (UNI EN10255 L01 only for BS1387 L – UNI3824 L).
    They can bend hoses of smaller diameter and bigger thickness proportionally.

    Read moreDone

  • UE – Pullers And Extractors

    Features

    They UE extractor series consists of two parts:

    – Mechanical, to be connected to the pieces which have to be extracted, it’s composed by high quality steel which ensures duration and reliability through time. It’s available in two different types, jaw type, to allow the grip on parts shrinked on axles, or tie rod type, for parts like the above ones which are equipped of attachment holes or in connection with ancillaries for external or internal use, for the extraction of peculiar parts;
    – Hydraulic, it provides the necessary force, in this set are included one PN or PS pump series, one CMF cylinder with one ZTE threaded saddle, one 1,8 m long hose, one male quick coupler and one G106L manometer.

    Pullers of UE range may be supplied in 5 tonnage types (5 – 10 – 20 – 30 – 50) and in 3 configurations, i.e.:

    – UEC# (complete puller set) which includes all mechanical parts and hydraulic components;
    – UEG# (jaw puller) consisting of 3 jaw puller and hydraulic components;
    – UET# (press puller set) consisting of pressure puller internal and external puller, hydraulic components;
    – UEZ# (self aligning puller) a 3 jay puller is also available for a more precise and easy positioning on the workplace.

    OPERATIONAL AREAS

    Indispensable when extracting gears, bearings, couplers and bushings etc. A correct assessment of the item to be extracted as well as the force required is essential for the correct selection of the puller component.

    ACCESSORIES :

    – UEB# carry case (except for the 50 ton model)

    OPTIONS :

    – Versione Z (UEC#Z) complete puller supplied with self aligning type jaw puller (UEZ) instead of the standard type jaw puller (UEG).

    Read moreDone