Hydraulic Tools And Systems

Some of the tools used for Hydraulic Tools And Systems are Bottle Jacks, Piston Cylinders Spring , Cylinders Spring and a portable pressure testing kit.

Showing 13–24 of 104 results

CMF#N – Steel Hollow Piston Cylinders Spring Return

Features

All the CMF cylinder series are supplied with a smooth hollow saddle and the cylinder body, rod and bottom are threaded to facilitate the fixing and fitting of eventual accessories. The end of stroke nut has a wiper seal which prevents the penetration of dirt inside the cylinder. Cylinders are supplied with anti-corrosive treatment which is very effective to protect the central bore.

OPERATIONAL AREAS

These cylinders are recommended for tensioning and for the extractiong of pulleys, bushes and heat exchangers.They can also be used in both pulling and pushing operations by inserting either a bar or a cable through the hollow saddle. These cylinders are also supplied with the UE pullers

ACCESSORIES:
– ZTE threaded saddle Allows the fitting of threaded bars usually for extractors (UEC / UEG / UEZ / UET series).

STANDARD:
– Smooth hollow saddle prevents any risk of any possible rod deformation.

OPTIONS:
– L version, cylinders with aluminium body ( CMF###L### )

Read more
CMF#NJ – Spring Return Cylinders With Hollow Piston For Barriers Type New Jersey And Guard-rails

Features

INTRODUCTION AND OPERATIONAL AREAS

The Europress system model CMF22N8S##NJ is used to verify and test the studs in New Jersey barriers and guard rails. The barriers both New Jersey, steel or concrete, and the guard rails are fixed to the road thanks to studs which generally have M16, M20 or M24 dimensions. Both during the installation and the exercise of the studs it’s necessary to verify them through traction tests in order to prove their adherence to concrete and the integrity of the material. To this purpose the Europress system allows to fulfill simple and efficient tensile strength tests. The system is composed of a traction load cell CMF22N8G constituted by a simple effect spring return hollow ram cylinder, with a nominal capacity of a maximum of 212 kN at 700 bars, 8 mm of stroke, firmly connected to a gauge and provided with a quick female coupler combined with a pump which generates hydraulic pressure. This traction cell constitutes an instrument to measure the force applied on the stud while testing. If calibrated as a measurement instrument it can be used also to redact calibration certificated tests. Depending on the different applications required the set can be equipped with ancillaries which are useful to the traction of studs of M16, M20, M24 diameter. Moreover it can be used a longer M20 diameter version for the traction of studs fixed on steel New Jersey barriers. The cylinder is activated by a PNP130 (or PN131) hand pump and a flexible hose SN20M with a male coupler on top.The pump is connected thanks to the male coupler fixed on one side of the hose which is connected to the female coupler fixed on the cylinder. The hollow ram cylinder, thanks to its through hole, allows the passage of the tie-rod of appropriate dimension in order to screw it on the stud itself. Extending the piston of the cylinder, a tensile force, proportional to the pressure generated by the pump, is exerted on the stud. The gauge allows at last to verify and control the force exerted on the stud.

Read more
CMI#N – Multi-purpose Cylinders, Spring Return With Metric Thread

Features

All the CMI cylinders have collar threads on the cylinder body and mounting holes in the base. They are supplied with an interchangeable grooved pushing saddle and models above 30 tonne are supplied with a handle for the carrying. A wiper seal is fitted on models above 5 tonne to prevent the penetration of dirt and to extend the life of the cylinder.

OPERATIONAL AREAS

These cylinders can be operated in any position and are extremely versatile and suitable for different applications, including industrial works, steel structural works, presses and special applications. The nitride treatment gives these cylinders an excellent resistance to corrosion and makes them particularly suitable to operate in the open air or in aggressive environments.

ACCESSORIES :
– ZTT tilt saddle reduces the effects of any possible off-centred load.
– Base plates. ZAB
– Clevis eyes. ZAR and ZAE

STANDARD :
– Base mounting holes.
– Pushing saddle prevents any risk of rod deformation.

Read more
CMI#W – Multi-purpose Cylinders, Spring Return With Imperial Thread

Features

All the CMI cylinders have collar threads on the cylinder body and mounting holes in the base. They are supplied with an interchangeable grooved pushing saddle and models above 30 tonne are supplied with a handle for the carrying. A wiper seal is fitted on models above 5 tonne to prevent the penetration of dirt and to extend the life of the cylinder.

OPERATIONAL AREAS

These cylinders can be operated in any position and are extremely versatile and suitable for different applications, including industrial works, steel structural works, presses and special applications. The nitride treatment gives these cylinders an excellent resistance to corrosion and makes them particularly suitable to operate in the open air or in aggressive environments.

ACCESSORIES :
– ZTT tilt saddle reduces the effects of any possible off-centred load.
– Base plates. ZAB
– Clevis eyes. ZAR and ZAE

STANDARD :
– Base mounting holes.
– Pushing saddle prevents any risk of rod deformation.

Read more
CML – Spring Return Aluminium Cylinders

Features

Five models of this type of cylinder are manufactured in a high resistance aluminium cylinder body (and end of stroke nut for 100 tonne) with a protective treatment, to increase the resistance to corrosion. Wiper seals are fitted to prevent the penetration of dirt. It’s recommended to carefully avoid, despite the protective treatment, the eventual flow of water which, due to the galvanic currents, can deteriorate the surface. Given the sensitivity of the material to work stress we suggest a maximum use of 5000 work cycles. All models are supplied with interchangeable grooved pushing saddle and have two lateral threaded holes to enable the mounting of a tilt saddle to reduce the effects of any side loading.

They are also fitted with a removable carry handle.

OPERATIONAL AREAS

Because of their extremely low weight and dimensions these cylinders are particularly suitable for use in applications where lightness and ease of handling are paramount.

ACCESSORIES :
– Separate ZTT tilt saddle reduces the effects of possible off-centre loads.

STANDARD :
– Pushing saddle prevents any risk of rod deformation.

Read more
CMP – Low Profile Cylinders, With Short Stroke Spring Return

Features

Their main feature is their long stroke in respect to their shortness but even though the CMP cylinders represent the widest range of low profile spring return cylinders. All cylinders have a grooved rod top and two threaded holes for the mounting of the tilt saddle. Holes at the bottom of the cylinder are available as an extra and the wiper avoids the prenetration of dirt.

OPERATIONAL AREAS
The small dimensions and the complete treatment against corrosion makes these cylinders ideal for lifting, levelling, supporting and pressing operations in restricted working areas and/or harsh environments.
General maintenance work, industrial assembly and construction are among the most common applications for this type of cylinder .

ACCESSORIES:
– Separate ZTT tilt saddle reduces the effects of possible off-centred loads.

STANDARD:
– Tilt saddle mounting holes.

OPTIONS :
– F version Cylinder with base mounting holes for fixing purposes.

Read more
CMT#L – Cilindri, Ritorno A Molla, Traenti In Alluminio

Caratteristiche Tecniche

Sono totalmente realizzati in alluminio (ad eccezione dello stelo e degli occhielli) e caratterizzati da un trattamento superficiale di anodizzazione.
Sono provvisti di soffietto per la protezione degli steli e, nei modelli a partire dalle 30 tonnellate, di maniglia di trasporto.

CAMPI DI UTILIZZO
Trovano specifico impiego nella cantieristica navale e nella carpenteria metallica pesante per accostare piastre, lamiere o elementi prefabbricati che devono essere saldati.

Read more
CMT#N – Spring Return Pulling Cylinders In Steel

Features

Range in steel ( CMT###N### ).
They are threaded on the body, on the rod and in the base to mount the proper accessories. The internal and external nitriding treatment gives them a proper resistance to wear and corrosion.

Range in aluminium ( CMT###L### ).
Manufactured totally in aluminium (except the rod and the eyelets) these cylinders are characterized by their superficial anodizing treatment. They are equipped with a bellow in order to protect the rod, and from 30 tonne models they are also equipped with handles to ease their transport.

OPERATIONAL AREAS

Range in steel ( CMT###N### ).
Their use is suggested in situations where it is necessary to closen small masses in assemblies, in buildings and in laboratories to test the resistance of materials.

Range in aluminium ( CMT###L### ).
They are especially used in ship buildings and in steel structural works to pull together plates, or prefabricated parts which have to be welded together.

ACCESSORI :
– ZAS set of eyelets for series N cylinders

Read more
COD – Industrial Cylinders, Double Acting Oil Return

Features

All COD cylinders have a threaded body, rod and base. This feature makes them estremely versatile. A complete range of accessories for working with various applications are available. The guide and end of stroke nut are provided with a wiper to prevent the entrance of dirt and to improve the working life of the cylinder.

OPERATIONAL AREAS

These cylinders are used in industrial applications where a large number of cycles are required. They are used in blocking operations, in laboratories and for tests which need pushing and pulling forces. The nitride anti-corrosive treatment makes them suitable for works in harsh environments and in the open air.

ACCESSORIES:

– ZAE Clevis eyes to be mounted on the rod or at the bottom.
– ZAF Flange to be mounted on the machined ends of the body.
– ZAP Plate to be mounted on the machined ends of the bod as alternative to the flange.
– ZAA Nut to block either the flange or the plate.

Read more
COF#L – Cilindri, Ritorno Ad Olio Con Pistone Forato In Alluminio

Caratteristiche Tecniche

Tutti i cilindri COF sono forniti con testina forata liscia e dispongono di foro passante e di filettatura sul corpo, nello stelo e nella base, per facilitare il fissaggio o l’inserimento di opportuni accessori. Una valvola di sicurezza collegata alla camera di ritorno ne impedisce la sovrapressione. La ghiera di fine corsa è completa di raschiatore, che impedisce l’ingresso di impurità nel cilindro. Il trattamento protettivo adottato in questi cilindri si rivela particolarmente adatto a proteggere il foro centrale dagli agenti aggressivi esterni.

CAMPI DI UTILIZZO
Il foro passante rende i cilindri particolarmente indicati per operazioni di tesatura di tensostrutture, montaggio ed estrazione di pulegge, boccole e tubi di scambiatori di calore. Sono utilizzabili sia in spinta sia in trazione inserendo una barra o una fune opportunamente vincolata alla testina.

ACCESSORI
Testina filettata ZTE permette il fissaggio di barre filettate.

STANDARD
Testina forata liscia evita il rischio di deformazioni dello stelo.

OPZIONI
versione L, cilindri con corpo in alluminio (COF###L###)

Read more
COF#N – Cylinders Oil Return With Hollow Piston Steel And Aluminium

Features

All COF cylinders are supplied with a smooth hollow saddle and have a have a threaded body, rod and base to facilitate the fixing and inserting of the necessary accessories. These cylinders are equipped with a safety valve which is connected to the retract chamber and prevents any possible overpressure. The end of stroke nut has a wiper to prevent the entrance of dirt.
The nitride anti-corrosive treatment makes them suitable for works in harsh environments and in the open air.

OPERATIONAL AREAS

The through hole makes them particularly suitable for tensioning, mounting and the extraction of pulleys, bushings and heat exchanger pipes. They can be used in pushing and pulling operations by putting a bar or a cable attached to the saddle.

ACCESSORIES:
– ZTE threaded saddle allows the mounting of threaded bars.

STANDARD:
– Smooth hollow saddle avoids any risk of rod deformation.

OPTIONS:
L version, cylinders with aluminum body ( COF###L### )

Read more
COG – Oil Return Cylinder With Safety Nut For High Tonnage

Features

Designed in function of their strength, they have the extremity of the rod equipped with grooved saddles in order to improve the grip of the load. All models are equipped with eyelets to facilitate their transport and positioning. A safety valve, calibrated at 150 bar, connected to the return chamber, avoids possible overpressure.

OPERATIONAL AREAS

They are very solid hydraulic cylinders recommended for lifting, pillaring and lowering operations. Given their double acting configuration they are suggested for the synchronous lowering with split flow power packs. They are mostly used in works of civil, naval, iron metallurgy, mechanical engineering, in industrial assembly and in heavy carpentry where the quick and total return of the rod and the support of the load with the safety nut are fundamental requirements.

OPTIONS:

– F version, cylinder with base mounting holes for fixing purposes.

ACCESSORIES:
– Separate ZTT tilt saddle reduces the effects of possible off-centred loads.

Read more