Features
The main quality of PN is the lightness (their weight is over 50% less compared to traditional products). They are made from light alloy metal which is normally used in the aviation field due to its mechanical resistance. Because of this, PN pumps are extremely handy and stand out due to a very low effort on their handle. The practical pedal locking hook allows to use the lever as a handle during transport by holding it in the correct position in order to balance the pump correctly even if equipped with ancillaries. The pumps with 1 and 2 liter oil tank have a brand new design and a bigger internal usable oil volume. This allows both to use the total internal capacity without opening the oil briefer cap or to fill the tank completely in order to use, with the cap in briefing position, a much bigger quantity of oil.
All 700 bar models have:
– Externally adjustable relief valve ;
– Side port 1/4” NPT for the direct fitting of the G106L gauge ( PN26# range excluded) ;
– 1/4” NPT hole to insert directly the G106 gauge only on the PN46# pump
– Fixing holes ;
– Tank from 1,2 – 2,2 – 4,3 e 7,8 lt.
All 1000 / 1600 / 2800 / 4000 bar models have:
– Double stage (except PN13110/16/28 and PN13110 models);
– Externally adjustable low and high pressure relief valves ;
– Second port (also usable as gauge port) only on PN13110/16/28, PN16#28 and PN13240 models;
– Fixing holes ;
– Tank from 1,2 – 2,2 – 4,3 e 7,8 lt.
All PN pumps can work vertically with the pumping head pointing downwards.
For a proper
They can be fastened by using the ZPN#MOD kit.
The usable oil volume is 100% of the reservoir capacity with 1 and 2 litre tanks, thanks to the filler cap positioned at the end of the tank.
OPERATIONAL AREAS
– PN13# Series Single stage pumps with 1,2 – 2,2 litre reservoirs, for single acting cylinders with short strokes and small/medium oil capacities.
– PN14# Series Double stage pumps with 1,2 – 2,2 litre reservoirs with a pressure relief valve on the first stage, recommended for single acting cylinders with medium strokes and medium oil capacities.
– PN16# Series Double stage pumps with 2,2 – 4,3 – 7,8 litre reservoirs with unloading valve to facilitate the pumping on the second stage; recommended for single acting cylinders with long strokes and large oil capacities.
– PN26# Series Double stage pumps with 2,2 – 4,3 – 7,8 litre reservoirs with unloading valve to facilitate the pumping on the second stage; with a 4 way valve, for double acting cylinders with long strokes and large oil capacities.
– PN46# Series Pumps like the PN26# series but equipped with an additional pilot check valve in order to maintain the load while moving the lever and to control the lowering of the cylinder under load.
– PN13110 – PN16#10 series Used in extracting operations, in lab tests and to operate hydraulic bolt tensioners models UTN and UTH.
– PN13116 – PN16#16 Series Used in all bearings extractions and to operate hydraulic bolt UTV tensioners.
– PN13128 – PN16#28 – PN13240 Series They are most useful and effective in cases of laddering of bearings, in tightenings, in pretensioning of studs, in burst tests and in calibrations.
