Rivets

Showing 25–36 of 40 results

  • fasteners

    Avdel Stavex

    Fast Facts:

    • Non-structural breakstem rivet.
    • Retained stem.
    • Blind hole, one-sided installation capability.
    • Wide choice of installation tools.
    • Multi-grip capability.
    • Superior hole fill.
    • High shear and tensile strength.
    • Provides a large blind-side bearing area against the rear sheet.
    • One fastener can be used to replace several standard grip fasteners.
    • Accommodates wide variations in material thickness.
    • Reduced fastener inventory and simpler stock control.
    • Spreads the tail bearing load/clamp on the rear sheet.
    • Ideal for use in thin sheet materials.
    • Compensates for irregular, oversized, slotted or misaligned holes.
    • Can stop sheet movement in non-standard holes.
    • Provides strong, vibration-resistant joints.
    • No damage, electrical problems or rattling due to loose stems.
    • Breakstem fasteners can be customized to meet unique assembly requirements.

    Specifications:

    • Sizes: 3.2mm to 6.4mm (1/8″ to ¼”)
    • Materials: Steel or stainless steel
    • Headforms: Dome, countersunk, and large flange
  • Bolting Tools

    Avdel Thin Sheet Nutsert

    Fast Facts:

    • Can be used in very thin sheet materials from 0.50mm (0.02″).
    • Blind hole, one-sided installation capability.
    • Provides a female thread-in application.
    • Can be installed in pre-coated or post-painted applications without damaging the surface.
    • Various platings available to increase the corrosion resistance.
    • Low-profile version allows near-flush fit to application.
    • Large-flange version provides greater load-bearing surface. Reinforces hole to prevent push out.
    • Large-flange version can be used as a spacer and can be supplied with an underhead seal.
    • Clamps two or more sheets of material together, within the grip range.
    • Closed end prevents the ingress of dirt and fluids into thread and electrical circuits.
    • Assembly applications include automotive, electrical engineering, electronic components, sheet metal, domestic appliances, and general light fabrication.

     

    Specifications:

    • Thread Sizes: M3-M10
    • Material: Steel, stainless steel, aluminium
    • Finishes steel: Zinc plated and clear trivalent passivated
    • Headforms: Low profile, countersunk, and large flange
    • Option: Closed end
    • Hole Size: Mainly imperial, soft metric for large-flange options
    THIN SHEET NUTSERT® – TECHNICAL DATA SHEETS
    Material Headform Series No.
    Steel Low Profile
    Low Profile, Closed End
    Large Flange, Closed End
    Thin Sheet Nutsert® 9658
    Thin Sheet Nutsert® FS38
    Thin Sheet Nutsert® FS58
    Stainless Steel Low Profile Thin Sheet Nutsert® 9468
    Aluminium Alloy Low Profile
    Large Flange
    Large Flange, Closed End
    90° Countersunk
    90° Countersunk, Closed End
    Thin Sheet Nutsert® GM17
    Thin Sheet Nutsert® FW78
    Thin Sheet Nutsert® GM68
    Thin Sheet Nutsert® FW96
    Thin Sheet Nutsert® GM57

     

  • Hydraulic Pumps

    Avdel Versa-Nut

    Fast Facts:

    • Installed quickly by using simple handtools (less than 3 seconds).
    • Blind hole, one-sided installation capability.
    • Extra-large blind side bearing area after placing.
    • Higher pull out and torque-to-turn resistance.
    • Less radial loading of holes in brittle materials.
    • Less risk of cracking and de-lamination of composites.
    • Up to twice the grip range of standard blind inserts.
    • Enables a designer to reduce the size or number of fasteners in an assembly.
    • Covers large variations of thicknesses.
    • Assembly applications include automotive trim and moldings, truck and trailer sandwich sections and paneling, domestic appliances (handles, adjustable feet, and fixing points) and plastic fabrications (assembly of plastic recreation equipment).

    Specifications:

    • Sizes: M5 – M8
    • Material: Low carbon steel
    • Headform: Large flange
    VERSA-NUT – TECHNICAL DATA SHEETS
    Material Headform Series No.
    Steel Large Flange Versa-Nut VN21

     

    Surface finish options
    If you are looking for other surface finish options than shown in the above datasheets please download our

    > Surface Finishes and Fastener Matrix for Threaded Inserts

    This will show you what surface finish options are possible to apply to our standard fastener types as “customer specials”.

    Customised Designs
    We can design and manufacture threaded inserts with a wide variety of forms and finishes to meet your unique assembly requirements. Please refer to this page to find examples of our customised capabilities:

    > Threaded Inserts – Customised Designs

    Installation Equipment
    Threaded Insert Equipment can be found at the following page

    > Threaded Insert Installation Equipment

  • fasteners

    POP Closed-End Blind Rivets

    Fast Facts:

    • Blind hole, one-sided installation capability.
    • Unique cup-shaped end configuration.
    • Seals tight, preventing passage of vapor or liquid around or through the set rivet.
    • 23% greater tensile strength than equivalent open-end rivets.
    • 100% mandrel retention.
    • Assembly applications include white goods, electronic enclosures, signs, outdoor cases, scoreboards, LED signs, and recreational vehicles.
  • fasteners

    POP Grip Tite Rivets

    Through thick and thin, Grip Tite™ rivets feature strong, vibration-resistant joints. Even with thin sheet metal or plastics, Grip Tite™ rivets will set without any material deformation. Grip Tite™ rivets provide mandrel retention and an impressive expanded footprint on the blind side. The wide blind side expansion feature can compensate for irregular holes and spread…

  • Hydraulic Pumps

    POP High-Retention (HR) Rivets

    Fast Facts:

    • Blind hole, one-sided installation capability.
    • Rib design counters deformation and stress-fracture pressures.
    • Positively retained mandrel head.
    • Excellent rattle (noise) resistance.
    • Consistent and stable clamp force.
    • Increased secondary-side expansion.
    • Assembly applications include automotive, electronic assembly, and transportation.
  • Hydraulic Pumps

    POP High-Strength (HS) Rivets

    Fast Facts:

    • Increased blind-side expansion.
    • High clamp load.
    • Vibration-resistant joints.
    • Accommodates oversized holes.
    • Positively retained mandrel head.
    • Excellent rattle (noise) resistance.
    • Grooved mandrel.
    • Optimizes jaw and tool life.
    • For use in structural applications.
  • Bolting Tools

    POP Jack-Nut Rivet Nuts

    Available in steel and brass, Jack-Nut rivet nuts can be coated with RAINTITE® to seal moisture and hard plastic PVC to prevent scratching and galvanic corrosion. Jack-Nut threaded inserts are RoHS-, ELoV-, and WEEE-compliant. Fast Facts: Fastens in blind holes Won’t distort or deform soft plastics or thin sheet metals Fast, inexpensive, and easy to use…

  • Hydraulic Pumps

    POP Load Spreading (LSR/LS) Rivets

    Fast Facts:

    • Designed for joining plastics and other brittle or soft materials.
    • Clamping loads spread over wide area, avoiding damage to vulnerable materials.
    • Accommodates oversized holes.
    • Corrosion-resistant.
    • High-strength aluminum 3.5% magnesium alloy.
    • Limited number of lengths needed because of wide grip range – up to 12.0mm.
    • Blind hole, one-sided installation capability.
    • Assembly applications include mobile homes, plastic-framed windows, plywood furniture, and timber products.

    Suggested Applications:

    LS are perfectly suited to plastics, wood, GRP, laminates, and thin-gauge materials. LS rivets have an important role to play in applications including the assembly of mobile homes and park homes, installation of plastic-framed windows, and the manufacture of plywood furniture or timber products such as trailers.

    This rivet should be selected whenever the materials to be fastened are so soft or brittle that the tensile force exerted by a conventional rivet would cause damage. Alternatively, use the soft-set rivet where a smaller secondary head is desired.

  • fasteners

    POP Micro Rivets

    Fast Facts:

    • Extremely small rivet.
    • Works well in tight areas or where space is a premium.
    • Ideal for thin sheet metal and printed circuit boards.
    • Very low secondary side.
    • Low head height.
    • Blind hole, one-sided installation capability.
    • Popular in electronics applications.
  • fasteners

    POP Multi-Grip Rivets

    Our Multi-Grip™ rivets do the job of several sizes of standard rivets. Multi-Grip™ rivets are best suited for applications where different material thicknesses normally require several rivet sizes. The wide grip range capability permits design flexibility and reduced rivet inventory, which can result in substantial cost savings. Multi-Grip™ rivets are valuable where components are supplied…

  • fasteners

    POP Open-End Rivets

    Fast Facts:

    • Design of the stem head ensures positive retention after installation
    • Wide range of diameters.
    • Wide range of lengths suitable for material thicknesses up to 26mm.
    • Countersunk (120°) heads available.
    • Break-head mandrels available in most sizes.
    • Blind hole, one-sided installation capability.
    Body Material Mandrel Material Head Style
    Dome Head Large Flange Countersunk
    5052 Aluminum Aluminum x x x
    5056 Aluminum Steel x x x
    5056 Aluminum Steel x x x
    C1006-1010 Steel Steel x x x
    300 Series Stainless Steel Stainless Steel x x x
    300 Series Stainless Steel Steel x x x
    110 Copper Steel x    
    Nickel-Copper Alloy (Monel) Steel x   x