Showing 13–24 of 239 results
Model
Available oil capacity L
Motor
Output Power KW
Dimensions LxWxH mm
Weight Kg
40
Gasoline Engine
3.5
560 x 540 x 665
55 kg
40
220 V/50 Hz
2.2
560 x 540 x 695
60 kg
40
diesel engine
5
550 x 480 x 750
810kg
Fast Facts:
Non-structural breakstem rivet.
Rivet stem retained in tubular component to avoid loose stems.
Blind hole, one-sided installation capability.
Extra-wide grip range from 15.8 mm to 98.4 mm (5/8″ to 3-7/8″).
Large bearing area against both sides of the application.
Spreads the tail bearing load/clamp load on the rear sheet to prevent damage.
Clamps tightly and securely without crushing parent material.
Excellent hole fill via radially expanded rivet body for a strong and vibration-resistant joint.
Low profile headform on both sides of the application for a neat appearance.
Can be used to fasten metal to metal, plastic to plastic, metal to plastic, metal rear sheet, and various composite materials.
Breakstem fasteners can be customized to meet unique assembly requirements.
Specifications:
Sizes: 4.8 mm and 6.4 mm (3/16″ and 1/4″)
Materials: Aluminum alloy and steel
Headforms: Dome
AVDELMATE® – SERIES
Material Headform Series
Steel
Dome
Avdelmate® SSLMS
Aluminium Alloy
Dome
Avdelmate® BALMS
Body: Aluminium
Dome
Avdelmate® BSLMS
Details can be found in the Breakstem Systems Catalog available in our Document Library.
Fast Facts:
Non-structural breakstem rivet.
Retained stem.
Blind hole, one-sided installation capability.
Multi-grip capability.
Good hole fill.
Provides a large blind side bearing area against the rear sheet.
Wide choice of installation tools.
One fastener can be used to replace several standard grip fasteners.
Accommodates wide variations in material thickness.
Reduced fastener inventory and simpler stock control.
Spreads the tail bearing load/clamp on the rear sheet.
Ideal for use in thin sheet materials.
Compensates for irregular, oversized, slotted, or misaligned holes.
Can stop sheet movement in non-standard holes.
Provides strong, vibration-resistant joints.
No damage, electrical problems, or rattling due to loose stems.
Breakstem fasteners can be customized to meet unique assembly requirements.
Specifications:
Sizes: 3.0mm to 6.4mm (1/4″)
Materials: Aluminum alloy with steel or stainless steel stems
Headforms: Dome, countersunk, and large flange
Fast Facts:
Non-structural breakstem rivet.
Retained stem.
Blind hole, one-sided installation capability.
High shear and tensile strength.
Good hole fill.
Provides a large blind side bearing area against the rear sheet.
Ideal for applications requiring elevated temperatures.
Spreads the tail bearing load/clamp on the rear sheet.
Ideal for use in thin sheet materials.
Compensates for irregular, oversized, slotted, or misaligned holes.
Can stop sheet movement in non-standard holes.
Provides strong, vibration resistant joints.
No damage, electrical problems, or rattling due to loose stems.
Breakstem fasteners can be customized to meet unique assembly requirements.
Specifications:
Sizes: 3.2mm (1/8″) to 6.0mm
Material: Steel, zinc & clear passivated
Headform: Dome
Fast Facts:
Structural breakstem rivet.
Reliable stem retention.
Blind hole, one-sided installation capability.
High shear and tensile strength.
Multi-grip capability.
High residual clamp load.
Resists vibration and joint slippage.
Good blind side footprint and bulb formation.
Spreads the tail bearing load/clamp on the rear sheet.
Suitable in softer materials.
Underhead recess accommodates burrs around holes and spreads load evenly on top sheet.
Avdel® patent protected.
Breakstem fasteners can be customized to meet unique assembly requirements.
Specifications:
Size: 6.4mm (1/4”) diameter
Material: Steel, zinc & clear passivated
Headform: Dome
Fast Facts:
Compact, lightweight placing head can be mounted separately and work in any position.
Modular design of blow feed unit and PLC control cabinet.
Modular component design allows for quick and simple integration into assembly lines.
Can work as a standalone unit.
Integral processing diagnostics at all stages with clear and simple PLC displays
Continuous fastener feed with average cycle time of approximately 5 seconds.
Ideal for high-volume production lines.
Fast Facts:
Non-structural breakstem rivet.
Retained stem.
Blind hole, one-sided installation capability.
High corrosion resistance.
High shear and tensile strength.
Good hole fill.
Provides a large blind side bearing area against the rear sheet.
Ideal for applications requiring elevated temperatures.
Spreads the tail bearing load/clamp load on the rear sheet.
Ideal for use in thin sheet materials.
Compensates for irregular, oversized, slotted, or misaligned holes.
Can stop movement in non-standard holes.
Provides strong, vibration-resistant joints.
Breakstem fasteners can be customized to meet unique assembly requirements.
Specifications:
Sizes: 3.2mm to 4.8mm (1/8″ to 3/16″)
Material: Stainless steel A2 and A4/316 Grade
Headform: Dome
AVINOX® – SERIES
Material Headform Series
Stainless Steel A2
Dome
Avinox® BE61
Stainless Steel A4
Dome
Avinox® BE16
Details can be found in the Breakstem Systems Catalog available in our Document Library.
Fast Facts:
Rolled/knurled shank ensures secure placement in the PCB.
Suitable for wire wrapping or a test point for CRO tubes.
Assembly applications include terminal posts and wire wrap.
Specifications:
Sizes: 1.6mm, 2.4mm and 3.2mm (1/16”, 3/32″ and 1/8”)
Materials: Electro tin-plated* brass (WEEE & RoHS compliant)
Headforms: Dome
AVLUG® – SERIES
Material Headform Series
Electro tin-plated* brass
Dome
Avlug® 1107
* Avdel® recommends tin-plated Avlug® parts are installed within nine months from the date they were produced.
Surface finish options
Fast Facts:
Blind hole, one-sided installation capability.
Internally threaded bore takes a threaded part e.g. D-subminiature connectors.
Available in many stand-off heights to accommodate a wide variety of components.
Can be used for board thicknesses of 0.8-2.0 mm (short spigot) or 0.8-2.4 mm max (long spigot).
Suitable as a female mating bush for D-subminiature connectors.
Available as a customized design to meet your unique assembly requirements.
Popular assembly applications include aluminum geartrays and extrusions, d-connectors, PCBs, and telecommunications equipment.
Specifications:
Sizes: M2.5 X 0.45 and M3 X 0.5 threads
Material: Tin-plated* brass
AVSERT® – SERIES
Material
Version
Series
Tin-plated* brass
short spigot
Avsert® 1117
Tin-plated* brass
long spigot
Avsert® 1118
* Avdel® recommends tin-plated Avsert® parts are installed within 24 months from the date they were produced.
Fast Facts:
Blind hole, one-sided installation capability.
Annular grooves on the body expand radially during installation.
Provides a vibration-resistant joint, increased pull-out resistance, and good residual clamp.
Available options accommodate most combinations of connector and PC board thickness.
Available as a customized design to meet your unique assembly requirements.
Specifications:
Sizes: 2.5mm and 2.8mm
Materials: Electro tin plated* brass and aluminum alloy (WEEE & RoHS compliant)
Headforms: Dome
AVTRONIC® – SERIES
Material Headform Series
Aluminum alloy
Dome
Avtronic® 1189
Electro tin-plated* brass
Dome
Avtronic® 1188
* Avdel® recommends tin-plated Avtronic® fasteners are installed within nine months from the date they were produced.
Fast Facts:
Bulbed tail and foreshortening of the fastener during installation ensures high clamp.
Bulbed tail and large headform provide a large bearing area for soft materials.
Tapered tail for ease of hole entry.
Expands radially during installation to ensure maximum hole fill.
Lower in-place costs than welding or nail rivets.
Placed using a unique repetition mandrel system for high-speed assembly.
Can be bowl fed for larger volume applications using automated equipment.
Available as a customized design to meet your unique assembly requirements.
Popular assembly applications include automotive, electronic components, sheet metal, electrical engineering, domestic appliances, furniture, and general light fabrication.
Specifications:
Sizes: 2.4mm (3/32″) to 6.0mm
Materials: Aluminum alloy, steel, stainless steel, brass, and tin-plated brass*
Headforms: Dome/mushroom, countersunk
Fast Facts:
Non-structural breakstem rivet.
Retained stem.
Blind hole, one-sided installation capability.
Multi-grip capability.
Split tail formation provides a very large blind side bearing area against the rear sheet.
Wide choice of installation tools.
One fastener can often be used to replace several standard grip fasteners.
Accommodates wide variations in material thickness.
Reduced fastener inventory and simpler stock control.
Spreads the tail bearing load/clamp load on the rear sheet.
No damage, electrical problems, or rattling due to loose stems.
Breakstem fasteners can be customized to meet unique assembly requirements.
Specifications:
Sizes: 4.0mm and 4.8mm (5/32″ and 3/16″)
Material: Aluminium alloy
Headform: Dome, large flange
