- Accessories
- Aerial Work Platforms
- Anchor Bolting & Huck Bolting
- Automotive Tools
- Backpack Electric-hydraulic Sets
- Battery Rescue Equipment
- Bearing Heaters
- Bolting Tools
- Clamping Tools
- Cranes & Hoists
- Crimping & Cutting Tools
- Electromagnetic Bearing Heater
- Hand Tools
- Heavy Rescue Cutter
- Hydraulic Cylinder
- Hydraulic Jacks
- Hydraulic Lifting Equipments
- Hydraulic Power Pumps
- Hydraulic Presses
- Hydraulic Puller
- Hydraulic Pumps
- Hydraulic Rescue Tools
- Hydraulic Spreader
- Hydraulic Tools And Systems
- Installation Equipment
- Lubrication Equipments
- Manual Rescue Tools & Assist Rescue Equipment
- Material Handling Equipments
- New Products
- Open & Closed Rivets
- Pin Pushers
- Pneumatic Piston Pump
- Portable Door Breaking Kit
- Post Tensioning Equipments
- Power Tools
- Rescue Tools
- Rivet Nuts
- Rivets
- Speed Fasteners
- Structural & Specialist Blind Rivets
- Tool Trolleys
- Toolboxes
- Track Pin Pusher
- Valves, Couplers & Hoses
Pneumatic Piston Oil Pump, Pumpmaster 35, Pm35 – 8:1, Stub With Adaptor, Npt
Technical Data
| Fluids | Corrosion protection fluids, Lubricant oil, Hydraulic oil, Gear oil, Transmission fluid |
| Noise level | 80 dB |
| Fluid inlet type | Ball check |
| Air inlet | 3/8″ NPT (F) |
| Pressure ratio | 8:1 |
| Air pressure operating range | 2 – 12 bar (29 – 174 psi) |
| Maximum free flow delivery (SI) | 17 l/min, 4.5 gal/min, 17 l/min |
| Cycles per litre (aprox.) | 80 cycles |
| Air motor stroke | 80 mm (3.15 “) |
| Air motor effective diameter | 80 mm (3.15 “) |
| Delivery | 7 l/min (1.9 gal/min) |
| Pump mounting | Universal stub pump with bung adaptor |
| Maximum outlet pressure | 96 bar (1392 psi) |
| Fluid inlet | 1″ NPT (F) |
| Wetted materials | Hard chromed steel, NBR, Polyurethane, Cast iron, Steel |
| Fluid outlet | 1/2″ NPT (F) |
| Total height | 487 mm (19 “) |
| Delivery per cycle | 7 l (1.9 gal) |
| Weight | 6.8 kg (15 lb) |
| Air consumption | 350 NL/min (12.4 scfm) |
| Tube height | 200 mm (7.9 “) |